The following packages will be installed: libmodbus Fetching README... 0%100%100%100%100%100%Done Fetching libmodbus.SlackBuild... 0%100%100%100%100%100%Done Fetching libmodbus.info... 0%100%100%100%100%100%Done Fetching slack-desc... 0%100%100%100%100%100%Done libmodbus-3.0.2/ libmodbus-3.0.2/config.guess libmodbus-3.0.2/aclocal.m4 libmodbus-3.0.2/COPYING.LESSER libmodbus-3.0.2/src/ libmodbus-3.0.2/src/modbus.h libmodbus-3.0.2/src/modbus-tcp-private.h libmodbus-3.0.2/src/Makefile.in libmodbus-3.0.2/src/modbus-version.h libmodbus-3.0.2/src/modbus-tcp.c libmodbus-3.0.2/src/modbus-rtu.c libmodbus-3.0.2/src/modbus-data.c libmodbus-3.0.2/src/modbus-tcp.h libmodbus-3.0.2/src/modbus-version.h.in libmodbus-3.0.2/src/modbus-rtu.h libmodbus-3.0.2/src/modbus-rtu-private.h libmodbus-3.0.2/src/modbus.c libmodbus-3.0.2/src/Makefile.am libmodbus-3.0.2/src/modbus-private.h libmodbus-3.0.2/acinclude.m4 libmodbus-3.0.2/Makefile.in libmodbus-3.0.2/COPYING libmodbus-3.0.2/missing libmodbus-3.0.2/m4/ libmodbus-3.0.2/m4/ltsugar.m4 libmodbus-3.0.2/m4/lt~obsolete.m4 libmodbus-3.0.2/m4/ltversion.m4 libmodbus-3.0.2/m4/ltoptions.m4 libmodbus-3.0.2/m4/libtool.m4 libmodbus-3.0.2/AUTHORS libmodbus-3.0.2/libmodbus.spec libmodbus-3.0.2/config.sub libmodbus-3.0.2/NEWS libmodbus-3.0.2/MIGRATION libmodbus-3.0.2/doc/ libmodbus-3.0.2/doc/modbus_set_bits_from_byte.txt libmodbus-3.0.2/doc/modbus_tcp_listen.html libmodbus-3.0.2/doc/modbus_get_header_length.html libmodbus-3.0.2/doc/modbus_set_debug.txt libmodbus-3.0.2/doc/modbus_close.3 libmodbus-3.0.2/doc/modbus_write_bit.txt libmodbus-3.0.2/doc/libmodbus.txt libmodbus-3.0.2/doc/modbus_receive_from.3 libmodbus-3.0.2/doc/modbus_receive.html libmodbus-3.0.2/doc/modbus_reply.txt libmodbus-3.0.2/doc/modbus_rtu_get_serial_mode.txt libmodbus-3.0.2/doc/modbus_write_bits.html libmodbus-3.0.2/doc/modbus_receive_from.html libmodbus-3.0.2/doc/modbus_set_byte_timeout.txt libmodbus-3.0.2/doc/modbus_get_socket.txt libmodbus-3.0.2/doc/modbus_write_registers.3 libmodbus-3.0.2/doc/modbus_connect.html libmodbus-3.0.2/doc/modbus_free.html libmodbus-3.0.2/doc/modbus_get_header_length.3 libmodbus-3.0.2/doc/modbus_write_bits.txt libmodbus-3.0.2/doc/modbus_set_socket.html libmodbus-3.0.2/doc/modbus_reply.3 libmodbus-3.0.2/doc/modbus_set_bits_from_bytes.3 libmodbus-3.0.2/doc/modbus_flush.3 libmodbus-3.0.2/doc/modbus_get_socket.3 libmodbus-3.0.2/doc/modbus_connect.3 libmodbus-3.0.2/doc/asciidoc.conf libmodbus-3.0.2/doc/modbus_new_tcp_pi.3 libmodbus-3.0.2/doc/modbus_reply_exception.3 libmodbus-3.0.2/doc/Makefile.in libmodbus-3.0.2/doc/modbus_set_socket.3 libmodbus-3.0.2/doc/modbus_report_slave_id.txt libmodbus-3.0.2/doc/modbus_get_byte_timeout.html libmodbus-3.0.2/doc/modbus_set_float.html libmodbus-3.0.2/doc/libmodbus.html libmodbus-3.0.2/doc/modbus_set_response_timeout.3 libmodbus-3.0.2/doc/modbus_set_socket.txt libmodbus-3.0.2/doc/modbus_send_raw_request.html libmodbus-3.0.2/doc/modbus_read_bits.txt libmodbus-3.0.2/doc/modbus_read_registers.3 libmodbus-3.0.2/doc/modbus_write_and_read_registers.html libmodbus-3.0.2/doc/modbus_get_byte_timeout.3 libmodbus-3.0.2/doc/modbus_mapping_new.html libmodbus-3.0.2/doc/modbus_set_byte_timeout.3 libmodbus-3.0.2/doc/modbus_strerror.html libmodbus-3.0.2/doc/modbus_set_bits_from_byte.3 libmodbus-3.0.2/doc/modbus_get_float.html libmodbus-3.0.2/doc/modbus_send_raw_request.txt libmodbus-3.0.2/doc/modbus_set_error_recovery.3 libmodbus-3.0.2/doc/modbus_receive.txt libmodbus-3.0.2/doc/modbus_new_rtu.3 libmodbus-3.0.2/doc/modbus_mapping_new.txt libmodbus-3.0.2/doc/modbus_get_response_timeout.txt libmodbus-3.0.2/doc/modbus_set_bits_from_byte.html libmodbus-3.0.2/doc/modbus_receive_from.txt libmodbus-3.0.2/doc/modbus_mapping_free.html libmodbus-3.0.2/doc/modbus_write_register.html libmodbus-3.0.2/doc/modbus_set_float.txt libmodbus-3.0.2/doc/modbus_mapping_free.3 libmodbus-3.0.2/doc/modbus_write_registers.txt libmodbus-3.0.2/doc/modbus_receive_confirmation.html libmodbus-3.0.2/doc/modbus_get_float.txt libmodbus-3.0.2/doc/modbus_set_slave.html libmodbus-3.0.2/doc/modbus_set_debug.3 libmodbus-3.0.2/doc/modbus_set_slave.txt libmodbus-3.0.2/doc/modbus_write_and_read_registers.3 libmodbus-3.0.2/doc/modbus_set_bits_from_bytes.html libmodbus-3.0.2/doc/modbus_receive_confirmation.3 libmodbus-3.0.2/doc/modbus_write_bit.3 libmodbus-3.0.2/doc/modbus_get_response_timeout.html libmodbus-3.0.2/doc/modbus_reply_exception.txt libmodbus-3.0.2/doc/modbus_new_tcp_pi.html libmodbus-3.0.2/doc/modbus_reply_exception.html libmodbus-3.0.2/doc/modbus_rtu_set_serial_mode.3 libmodbus-3.0.2/doc/modbus_get_byte_from_bits.html libmodbus-3.0.2/doc/modbus_set_bits_from_bytes.txt libmodbus-3.0.2/doc/modbus_send_raw_request.3 libmodbus-3.0.2/doc/modbus_write_register.3 libmodbus-3.0.2/doc/modbus_report_slave_id.3 libmodbus-3.0.2/doc/modbus_read_input_registers.txt libmodbus-3.0.2/doc/modbus_new_rtu.txt libmodbus-3.0.2/doc/modbus_new_tcp.html libmodbus-3.0.2/doc/modbus_read_registers.txt libmodbus-3.0.2/doc/modbus_set_response_timeout.txt libmodbus-3.0.2/doc/modbus_new_tcp.3 libmodbus-3.0.2/doc/libmodbus.7 libmodbus-3.0.2/doc/modbus_mapping_new.3 libmodbus-3.0.2/doc/modbus_read_registers.html libmodbus-3.0.2/doc/modbus_get_byte_from_bits.3 libmodbus-3.0.2/doc/modbus_read_bits.3 libmodbus-3.0.2/doc/modbus_tcp_listen.txt libmodbus-3.0.2/doc/modbus_close.html libmodbus-3.0.2/doc/modbus_new_tcp_pi.txt libmodbus-3.0.2/doc/modbus_report_slave_id.html libmodbus-3.0.2/doc/modbus_get_byte_timeout.txt libmodbus-3.0.2/doc/modbus_new_rtu.html libmodbus-3.0.2/doc/modbus_rtu_set_serial_mode.txt libmodbus-3.0.2/doc/modbus_receive_confirmation.txt libmodbus-3.0.2/doc/modbus_read_input_registers.3 libmodbus-3.0.2/doc/modbus_flush.txt libmodbus-3.0.2/doc/modbus_reply.html libmodbus-3.0.2/doc/modbus_write_bit.html libmodbus-3.0.2/doc/modbus_strerror.3 libmodbus-3.0.2/doc/modbus_flush.html libmodbus-3.0.2/doc/modbus_get_socket.html libmodbus-3.0.2/doc/modbus_set_error_recovery.html libmodbus-3.0.2/doc/modbus_get_byte_from_bits.txt libmodbus-3.0.2/doc/modbus_set_error_recovery.txt libmodbus-3.0.2/doc/modbus_set_response_timeout.html libmodbus-3.0.2/doc/modbus_free.txt libmodbus-3.0.2/doc/modbus_strerror.txt libmodbus-3.0.2/doc/modbus_read_input_bits.txt libmodbus-3.0.2/doc/modbus_mapping_free.txt libmodbus-3.0.2/doc/modbus_rtu_get_serial_mode.html libmodbus-3.0.2/doc/modbus_rtu_set_serial_mode.html libmodbus-3.0.2/doc/modbus_receive.3 libmodbus-3.0.2/doc/modbus_free.3 libmodbus-3.0.2/doc/modbus_set_slave.3 libmodbus-3.0.2/doc/modbus_set_byte_timeout.html libmodbus-3.0.2/doc/modbus_new_tcp.txt libmodbus-3.0.2/doc/modbus_get_header_length.txt libmodbus-3.0.2/doc/modbus_read_input_bits.html libmodbus-3.0.2/doc/modbus_connect.txt libmodbus-3.0.2/doc/Makefile.am libmodbus-3.0.2/doc/modbus_tcp_listen.3 libmodbus-3.0.2/doc/modbus_write_registers.html libmodbus-3.0.2/doc/modbus_get_float.3 libmodbus-3.0.2/doc/modbus_set_debug.html libmodbus-3.0.2/doc/modbus_rtu_get_serial_mode.3 libmodbus-3.0.2/doc/modbus_read_input_bits.3 libmodbus-3.0.2/doc/modbus_get_response_timeout.3 libmodbus-3.0.2/doc/modbus_close.txt libmodbus-3.0.2/doc/modbus_set_float.3 libmodbus-3.0.2/doc/modbus_read_bits.html libmodbus-3.0.2/doc/modbus_write_register.txt libmodbus-3.0.2/doc/modbus_write_and_read_registers.txt libmodbus-3.0.2/doc/modbus_read_input_registers.html libmodbus-3.0.2/doc/modbus_write_bits.3 libmodbus-3.0.2/libmodbus.spec.in libmodbus-3.0.2/libmodbus.pc.in libmodbus-3.0.2/config.h.in libmodbus-3.0.2/ltmain.sh libmodbus-3.0.2/depcomp libmodbus-3.0.2/Makefile.am libmodbus-3.0.2/tests/ libmodbus-3.0.2/tests/version.c libmodbus-3.0.2/tests/random-test-server.c libmodbus-3.0.2/tests/random-test-client.c libmodbus-3.0.2/tests/README libmodbus-3.0.2/tests/Makefile.in libmodbus-3.0.2/tests/bandwidth-server-one.c libmodbus-3.0.2/tests/unit-test-client.c libmodbus-3.0.2/tests/unit-test.h.in libmodbus-3.0.2/tests/bandwidth-client.c libmodbus-3.0.2/tests/bandwidth-server-many-up.c libmodbus-3.0.2/tests/unit-test-server.c libmodbus-3.0.2/tests/Makefile.am libmodbus-3.0.2/tests/unit-test.h libmodbus-3.0.2/configure.ac libmodbus-3.0.2/install-sh libmodbus-3.0.2/configure libmodbus-3.0.2/README.rst checking for a BSD-compatible install... /usr/bin/ginstall -c checking whether build environment is sane... yes checking for a thread-safe mkdir -p... /usr/bin/mkdir -p checking for gawk... gawk checking whether make sets $(MAKE)... yes checking build system type... i486-slackware-linux-gnu checking host system type... i486-slackware-linux-gnu checking for gcc... gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ISO C89... none needed checking for style of include used by make... GNU checking dependency style of gcc... gcc3 checking for g++... g++ checking whether we are using the GNU C++ compiler... yes checking whether g++ accepts -g... yes checking dependency style of g++... gcc3 checking whether make sets $(MAKE)... (cached) yes checking how to print strings... printf checking for a sed that does not truncate output... /usr/bin/sed checking for grep that handles long lines and -e... /usr/bin/grep checking for egrep... /usr/bin/grep -E checking for fgrep... /usr/bin/grep -F checking for ld used by gcc... /usr/i586-slackware-linux/bin/ld checking if the linker (/usr/i586-slackware-linux/bin/ld) is GNU ld... yes checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B checking the name lister (/usr/bin/nm -B) interface... BSD nm checking whether ln -s works... yes checking the maximum length of command line arguments... 1572864 checking whether the shell understands some XSI constructs... yes checking whether the shell understands "+="... yes checking how to convert i486-slackware-linux-gnu file names to i486-slackware-linux-gnu format... func_convert_file_noop checking how to convert i486-slackware-linux-gnu file names to toolchain format... func_convert_file_noop checking for /usr/i586-slackware-linux/bin/ld option to reload object files... -r checking for objdump... objdump checking how to recognize dependent libraries... pass_all checking for dlltool... dlltool checking how to associate runtime and link libraries... printf %s\n checking for ar... ar checking for archiver @FILE support... @ checking for strip... strip checking for ranlib... ranlib checking command to parse /usr/bin/nm -B output from gcc object... ok checking for sysroot... no checking for mt... no checking if : is a manifest tool... no checking how to run the C preprocessor... gcc -E checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking for dlfcn.h... yes checking for objdir... .libs checking if gcc supports -fno-rtti -fno-exceptions... no checking for gcc option to produce PIC... -fPIC -DPIC checking if gcc PIC flag -fPIC -DPIC works... yes checking if gcc static flag -static works... yes checking if gcc supports -c -o file.o... yes checking if gcc supports -c -o file.o... (cached) yes checking whether the gcc linker (/usr/i586-slackware-linux/bin/ld) supports shared libraries... yes checking whether -lc should be explicitly linked in... no checking dynamic linker characteristics... GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... no checking how to run the C++ preprocessor... g++ -E checking for ld used by g++... /usr/i586-slackware-linux/bin/ld checking if the linker (/usr/i586-slackware-linux/bin/ld) is GNU ld... yes checking whether the g++ linker (/usr/i586-slackware-linux/bin/ld) supports shared libraries... yes checking for g++ option to produce PIC... -fPIC -DPIC checking if g++ PIC flag -fPIC -DPIC works... yes checking if g++ static flag -static works... yes checking if g++ supports -c -o file.o... yes checking if g++ supports -c -o file.o... (cached) yes checking whether the g++ linker (/usr/i586-slackware-linux/bin/ld) supports shared libraries... yes checking dynamic linker characteristics... (cached) GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking termios.h usability... yes checking termios.h presence... yes checking for termios.h... yes checking sys/time.h usability... yes checking sys/time.h presence... yes checking for sys/time.h... yes checking time.h usability... yes checking time.h presence... yes checking for time.h... yes checking for unistd.h... (cached) yes checking errno.h usability... yes checking errno.h presence... yes checking for errno.h... yes checking limits.h usability... yes checking limits.h presence... yes checking for limits.h... yes checking fcntl.h usability... yes checking fcntl.h presence... yes checking for fcntl.h... yes checking for sys/types.h... (cached) yes checking sys/socket.h usability... yes checking sys/socket.h presence... yes checking for sys/socket.h... yes checking sys/ioctl.h usability... yes checking sys/ioctl.h presence... yes checking for sys/ioctl.h... yes checking netinet/in.h usability... yes checking netinet/in.h presence... yes checking for netinet/in.h... yes checking netinet/tcp.h usability... yes checking netinet/tcp.h presence... yes checking for netinet/tcp.h... yes checking arpa/inet.h usability... yes checking arpa/inet.h presence... yes checking for arpa/inet.h... yes checking netdb.h usability... yes checking netdb.h presence... yes checking for netdb.h... yes checking linux/serial.h usability... yes checking linux/serial.h presence... yes checking for linux/serial.h... yes checking for asciidoc... yes checking for xmlto... yes checking whether to build documentation... yes checking whether to install manpages... yes checking for ANSI C header files... (cached) yes checking for an ANSI C-conforming const... yes checking for size_t... yes checking whether time.h and sys/time.h may both be included... yes checking whether __CYGWIN__ is declared... no checking for pid_t... yes checking vfork.h usability... no checking vfork.h presence... no checking for vfork.h... no checking for fork... yes checking for vfork... yes checking for working fork... yes checking for working vfork... (cached) yes checking for gettimeofday... yes checking for inet_ntoa... yes checking for memset... yes checking for select... yes checking for socket... yes checking for strerror... yes checking for strlcpy... no checking for getaddrinfo... yes checking winsock2.h usability... no checking winsock2.h presence... no checking for winsock2.h... no checking whether TIOCSRS485 is declared... yes configure: creating ./config.status config.status: creating Makefile config.status: creating src/Makefile config.status: creating src/modbus-version.h config.status: creating doc/Makefile config.status: creating tests/Makefile config.status: creating libmodbus.pc config.status: creating libmodbus.spec config.status: creating config.h config.status: creating tests/unit-test.h config.status: tests/unit-test.h is unchanged config.status: executing depfiles commands config.status: executing libtool commands make all-recursive make[1]: Entering directory '/usr/src/slapt-src/libraries/libmodbus/libmodbus-3.0.2' Making all in src make[2]: Entering directory '/usr/src/slapt-src/libraries/libmodbus/libmodbus-3.0.2/src' CC modbus.lo CC modbus-data.lo CC modbus-rtu.lo CC modbus-tcp.lo CCLD libmodbus.la make[2]: Leaving directory '/usr/src/slapt-src/libraries/libmodbus/libmodbus-3.0.2/src' Making all in doc make[2]: Entering directory '/usr/src/slapt-src/libraries/libmodbus/libmodbus-3.0.2/doc' make[2]: Nothing to be done for 'all'. make[2]: Leaving directory '/usr/src/slapt-src/libraries/libmodbus/libmodbus-3.0.2/doc' Making all in tests make[2]: Entering directory '/usr/src/slapt-src/libraries/libmodbus/libmodbus-3.0.2/tests' make all-am make[3]: Entering directory '/usr/src/slapt-src/libraries/libmodbus/libmodbus-3.0.2/tests' CC bandwidth-server-one.o CCLD bandwidth-server-one CC bandwidth-server-many-up.o CCLD bandwidth-server-many-up CC bandwidth-client.o CCLD bandwidth-client CC random-test-server.o CCLD random-test-server CC random-test-client.o CCLD random-test-client CC unit-test-server.o CCLD unit-test-server CC unit-test-client.o CCLD unit-test-client CC version.o CCLD version make[3]: Leaving directory '/usr/src/slapt-src/libraries/libmodbus/libmodbus-3.0.2/tests' make[2]: Leaving directory '/usr/src/slapt-src/libraries/libmodbus/libmodbus-3.0.2/tests' make[2]: Entering directory '/usr/src/slapt-src/libraries/libmodbus/libmodbus-3.0.2' make[2]: Leaving directory '/usr/src/slapt-src/libraries/libmodbus/libmodbus-3.0.2' make[1]: Leaving directory '/usr/src/slapt-src/libraries/libmodbus/libmodbus-3.0.2' make INSTALL_PROGRAM="/bin/sh /usr/src/slapt-src/libraries/libmodbus/libmodbus-3.0.2/install-sh -c -s" \ install_sh_PROGRAM="/bin/sh /usr/src/slapt-src/libraries/libmodbus/libmodbus-3.0.2/install-sh -c -s" INSTALL_STRIP_FLAG=-s \ `test -z 'strip' || \ echo "INSTALL_PROGRAM_ENV=STRIPPROG='strip'"` install make[1]: Entering directory '/usr/src/slapt-src/libraries/libmodbus/libmodbus-3.0.2' Making install in src make[2]: Entering directory '/usr/src/slapt-src/libraries/libmodbus/libmodbus-3.0.2/src' make[3]: Entering directory '/usr/src/slapt-src/libraries/libmodbus/libmodbus-3.0.2/src' test -z "/usr/lib" || /usr/bin/mkdir -p "/usr/src/slapt-src/libraries/libmodbus/package-libmodbus/usr/lib" /bin/sh ../libtool --mode=install /usr/bin/ginstall -c -s libmodbus.la '/usr/src/slapt-src/libraries/libmodbus/package-libmodbus/usr/lib' libtool: install: /usr/bin/ginstall -c .libs/libmodbus.so.5.0.1 /usr/src/slapt-src/libraries/libmodbus/package-libmodbus/usr/lib/libmodbus.so.5.0.1 libtool: install: strip --strip-unneeded /usr/src/slapt-src/libraries/libmodbus/package-libmodbus/usr/lib/libmodbus.so.5.0.1 libtool: install: (cd /usr/src/slapt-src/libraries/libmodbus/package-libmodbus/usr/lib && { ln -s -f libmodbus.so.5.0.1 libmodbus.so.5 || { rm -f libmodbus.so.5 && ln -s libmodbus.so.5.0.1 libmodbus.so.5; }; }) libtool: install: (cd /usr/src/slapt-src/libraries/libmodbus/package-libmodbus/usr/lib && { ln -s -f libmodbus.so.5.0.1 libmodbus.so || { rm -f libmodbus.so && ln -s libmodbus.so.5.0.1 libmodbus.so; }; }) libtool: install: /usr/bin/ginstall -c .libs/libmodbus.lai /usr/src/slapt-src/libraries/libmodbus/package-libmodbus/usr/lib/libmodbus.la libtool: install: warning: remember to run `libtool --finish /usr/lib' test -z "/usr/include/modbus" || /usr/bin/mkdir -p "/usr/src/slapt-src/libraries/libmodbus/package-libmodbus/usr/include/modbus" /usr/bin/ginstall -c -m 644 modbus.h modbus-version.h modbus-rtu.h modbus-tcp.h '/usr/src/slapt-src/libraries/libmodbus/package-libmodbus/usr/include/modbus' make[3]: Leaving directory '/usr/src/slapt-src/libraries/libmodbus/libmodbus-3.0.2/src' make[2]: Leaving directory '/usr/src/slapt-src/libraries/libmodbus/libmodbus-3.0.2/src' Making install in doc make[2]: Entering directory '/usr/src/slapt-src/libraries/libmodbus/libmodbus-3.0.2/doc' make[3]: Entering directory '/usr/src/slapt-src/libraries/libmodbus/libmodbus-3.0.2/doc' make[3]: Nothing to be done for 'install-exec-am'. test -z "/usr/man/man3" || /usr/bin/mkdir -p "/usr/src/slapt-src/libraries/libmodbus/package-libmodbus/usr/man/man3" /usr/bin/ginstall -c -m 644 modbus_close.3 modbus_connect.3 modbus_flush.3 modbus_free.3 modbus_get_byte_from_bits.3 modbus_get_byte_timeout.3 modbus_get_float.3 modbus_get_header_length.3 modbus_get_response_timeout.3 modbus_get_socket.3 modbus_mapping_free.3 modbus_mapping_new.3 modbus_new_rtu.3 modbus_new_tcp_pi.3 modbus_new_tcp.3 modbus_read_bits.3 modbus_read_input_bits.3 modbus_read_input_registers.3 modbus_read_registers.3 modbus_receive_confirmation.3 modbus_receive_from.3 modbus_receive.3 modbus_reply_exception.3 modbus_reply.3 modbus_report_slave_id.3 modbus_rtu_get_serial_mode.3 modbus_rtu_set_serial_mode.3 modbus_send_raw_request.3 modbus_set_bits_from_bytes.3 modbus_set_bits_from_byte.3 modbus_set_byte_timeout.3 modbus_set_debug.3 modbus_set_error_recovery.3 modbus_set_float.3 modbus_set_response_timeout.3 modbus_set_slave.3 modbus_set_socket.3 modbus_strerror.3 modbus_tcp_listen.3 modbus_write_and_read_registers.3 '/usr/src/slapt-src/libraries/libmodbus/package-libmodbus/usr/man/man3' /usr/bin/ginstall -c -m 644 modbus_write_bits.3 modbus_write_bit.3 modbus_write_registers.3 modbus_write_register.3 '/usr/src/slapt-src/libraries/libmodbus/package-libmodbus/usr/man/man3' test -z "/usr/man/man7" || /usr/bin/mkdir -p "/usr/src/slapt-src/libraries/libmodbus/package-libmodbus/usr/man/man7" /usr/bin/ginstall -c -m 644 libmodbus.7 '/usr/src/slapt-src/libraries/libmodbus/package-libmodbus/usr/man/man7' make[3]: Leaving directory '/usr/src/slapt-src/libraries/libmodbus/libmodbus-3.0.2/doc' make[2]: Leaving directory '/usr/src/slapt-src/libraries/libmodbus/libmodbus-3.0.2/doc' Making install in tests make[2]: Entering directory '/usr/src/slapt-src/libraries/libmodbus/libmodbus-3.0.2/tests' make[3]: Entering directory '/usr/src/slapt-src/libraries/libmodbus/libmodbus-3.0.2/tests' make[3]: Nothing to be done for 'install-exec-am'. make[3]: Nothing to be done for 'install-data-am'. make[3]: Leaving directory '/usr/src/slapt-src/libraries/libmodbus/libmodbus-3.0.2/tests' make[2]: Leaving directory '/usr/src/slapt-src/libraries/libmodbus/libmodbus-3.0.2/tests' make[2]: Entering directory '/usr/src/slapt-src/libraries/libmodbus/libmodbus-3.0.2' make[3]: Entering directory '/usr/src/slapt-src/libraries/libmodbus/libmodbus-3.0.2' make[3]: Nothing to be done for 'install-exec-am'. test -z "/usr/lib/pkgconfig" || /usr/bin/mkdir -p "/usr/src/slapt-src/libraries/libmodbus/package-libmodbus/usr/lib/pkgconfig" /usr/bin/ginstall -c -m 644 libmodbus.pc '/usr/src/slapt-src/libraries/libmodbus/package-libmodbus/usr/lib/pkgconfig' make[3]: Leaving directory '/usr/src/slapt-src/libraries/libmodbus/libmodbus-3.0.2' make[2]: Leaving directory '/usr/src/slapt-src/libraries/libmodbus/libmodbus-3.0.2' make[1]: Leaving directory '/usr/src/slapt-src/libraries/libmodbus/libmodbus-3.0.2' Slackware package maker, version 3.141593. Searching for symbolic links: usr/lib/libmodbus.so libmodbus.so.5.0.1 usr/lib/libmodbus.so.5 libmodbus.so.5.0.1 Making symbolic link creation script: ( cd usr/lib ; rm -rf libmodbus.so ) ( cd usr/lib ; ln -sf libmodbus.so.5.0.1 libmodbus.so ) ( cd usr/lib ; rm -rf libmodbus.so.5 ) ( cd usr/lib ; ln -sf libmodbus.so.5.0.1 libmodbus.so.5 ) It is recommended that you make these lines your new installation script. Would you like to make this stuff the install script for this package and remove the symbolic links ([y]es, [n]o)? y Removing symbolic links: removed './usr/lib/libmodbus.so' removed './usr/lib/libmodbus.so.5' Creating your new ./install/doinst.sh... This next step is optional - you can set the directories in your package to some sane permissions. If any of the directories in your package have special permissions, then DO NOT reset them here! Would you like to reset all directory permissions to 755 (drwxr-xr-x) and directory ownerships to root.root ([y]es, [n]o)? n Creating Slackware package: /usr/src/slapt-src/libraries/libmodbus/libmodbus-3.0.2-i486-1salix.txz ./ usr/ usr/include/ usr/include/modbus/ usr/include/modbus/modbus-version.h usr/include/modbus/modbus-tcp.h usr/include/modbus/modbus-rtu.h usr/include/modbus/modbus.h usr/lib/ usr/lib/libmodbus.la usr/lib/pkgconfig/ usr/lib/pkgconfig/libmodbus.pc usr/lib/libmodbus.so.5.0.1 usr/doc/ usr/doc/libmodbus-3.0.2/ usr/doc/libmodbus-3.0.2/COPYING usr/doc/libmodbus-3.0.2/NEWS usr/doc/libmodbus-3.0.2/AUTHORS usr/doc/libmodbus-3.0.2/COPYING.LESSER usr/doc/libmodbus-3.0.2/libmodbus.SlackBuild usr/doc/libmodbus-3.0.2/MIGRATION usr/doc/libmodbus-3.0.2/README.rst usr/man/ usr/man/man7/ usr/man/man7/libmodbus.7.gz usr/man/man3/ usr/man/man3/modbus_new_tcp.3.gz usr/man/man3/modbus_set_bits_from_byte.3.gz usr/man/man3/modbus_set_debug.3.gz usr/man/man3/modbus_get_header_length.3.gz usr/man/man3/modbus_set_response_timeout.3.gz usr/man/man3/modbus_new_rtu.3.gz usr/man/man3/modbus_set_float.3.gz usr/man/man3/modbus_connect.3.gz usr/man/man3/modbus_set_bits_from_bytes.3.gz usr/man/man3/modbus_mapping_free.3.gz usr/man/man3/modbus_read_input_bits.3.gz usr/man/man3/modbus_new_tcp_pi.3.gz usr/man/man3/modbus_write_bit.3.gz usr/man/man3/modbus_close.3.gz usr/man/man3/modbus_mapping_new.3.gz usr/man/man3/modbus_receive.3.gz usr/man/man3/modbus_tcp_listen.3.gz usr/man/man3/modbus_receive_confirmation.3.gz usr/man/man3/modbus_write_register.3.gz usr/man/man3/modbus_reply_exception.3.gz usr/man/man3/modbus_write_and_read_registers.3.gz usr/man/man3/modbus_set_socket.3.gz usr/man/man3/modbus_flush.3.gz usr/man/man3/modbus_write_registers.3.gz usr/man/man3/modbus_read_input_registers.3.gz usr/man/man3/modbus_get_float.3.gz usr/man/man3/modbus_free.3.gz usr/man/man3/modbus_reply.3.gz usr/man/man3/modbus_set_byte_timeout.3.gz usr/man/man3/modbus_report_slave_id.3.gz usr/man/man3/modbus_get_byte_timeout.3.gz usr/man/man3/modbus_rtu_get_serial_mode.3.gz usr/man/man3/modbus_set_error_recovery.3.gz usr/man/man3/modbus_read_registers.3.gz usr/man/man3/modbus_get_byte_from_bits.3.gz usr/man/man3/modbus_get_response_timeout.3.gz usr/man/man3/modbus_read_bits.3.gz usr/man/man3/modbus_get_socket.3.gz usr/man/man3/modbus_send_raw_request.3.gz usr/man/man3/modbus_receive_from.3.gz usr/man/man3/modbus_set_slave.3.gz usr/man/man3/modbus_strerror.3.gz usr/man/man3/modbus_write_bits.3.gz usr/man/man3/modbus_rtu_set_serial_mode.3.gz install/ install/doinst.sh install/slack-desc Slackware package /usr/src/slapt-src/libraries/libmodbus/libmodbus-3.0.2-i486-1salix.txz created. Installing package libmodbus-3.0.2-i486-1salix... | libmodbus (a fast and portable Modbus library) | | libmodbus is a free software library to send/receive data according | to the Modbus protocol. This library is written in C and supports | RTU (serial) and TCP (Ethernet) communications. | | Homepage: http://www.libmodbus.org | | | | | |